DALI Gateway DIN Rail Power Supply Controller for DALI Lighting Control
Smart Lighting Control System Solution Advantages
1. Cost and time advantages in planning, installation, commissioning and reprogramming
2. Improves comfort.
3. High flexibility, extense function at any time
4. DIN rail components and surface mounted devices
5. Input and output combinated various devices.
6. All loads in the room (lights, blinds, heating, etc.) can be controlled using a central device
DIN Rail Power Supply Controller Specifications
|
Output Rating
|
60 Watts (2.5 Amps) at 24 Volts DC, regulated, limited power source
|
|
Line Power/Mains
|
200 VA (2 Amps max.) @ 110-250 Volts AC, 50/60 Hz
|
|
Power Consumption
|
70 Watts at full rated output
|
|
100-277VAC 50/60Hz
|
(2) Set of (3) captive screw terminals; Line power input and ground
|
|
FUSE
|
(1) AC input fuse, T3.15AH;4x8 mm, 250 Volts, 3.15 Amps, time-lag, ceramic cartridge
|
|
NET
|
(2) 4-pin 3.81 mm detachable terminal blocks, paralleled;DC-NET power output ports with data pass-through
|
|
Ripple/Noise
|
<1%
|
|
Efficiency
|
85%
|
|
Temperature
|
32° to 104° F (0° to 40° C)
|
|
Humidity
|
10% to 90% RH (non- condensing)
|
DIN Rail Power Supply Controller Application
Automation Lighting Control System Applied in: stadium, school, hospital, airport, metro, church, office, commercial building, parking lot/car park/parking area, outdoor spaces, foyer, lobby, elevator hall, public walkway, bathroom, underground garage, meeting room, villa, home lighting, plazas, shopping malls, public building, industrial plants and factories, etc
DIN Rail Power Supply Controller Features
The DIN-PWS60 is a 60 Watt DC-NET Power Supply module. Two DC-NET power ports are provided to supply power for the whole lighting control system. It designed to snap onto a standard DIN rail for easy installation in a wall-mount enclosure.
The DIN-PWS60 communicates with a DIN-CP1 Automation Processor, or other Third-Party control systems, via the DC-NET control network A pair of DC-NET ports on the DIN-PWS60 allows for easy daisy-chaining of several DIN Rail Series automation control modules.
DIN Rail Power Supply Controller Installation
The DIN-PWS60 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-PWS60's front panel stays ac
cessible while the connections are concealed.
DIN Rail Power Supply Controller Exhibition
FAQ
1. What is intelligent lightincontrol g system?
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for you, economic and customization, with industrial-grade design, product architecture in line with international electrical standards, using high-quality components, products are stable and reliable.
Ваше сообщение должно содержать от 20 до 3000 символов!
